Two FK2100 motors—1.8 amps combined, ceiling mounted, reversible (reverse switch located on switch cup housing).No more than 6 fan assemblies or idlers combined per motor. Not recommended for sound-sensitive areas. 220 VAC,50 Hz, single-speed motor is also available.
18' x 18' x ¾' plywood backing able to support at least 50 lbs. Flush mounted junction box placed on center.
A 120 Volts AC, 60 Hz, 15 amps circuit electrical feed, centered under the motor unit and wired to a standard wall switch (user supplied) is required. The motor unit will not operate more than 6 fan assemblies or idlers combined